Jupiter Roll Forming Private Limited
Gondal, Rajkot, Gujarat
GST No. 24AADCJ8734A1ZV
TrustSEAL Verified
Call 0804898322775% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Job Thickness | 1-2 mm, 2-3 mm, 0.1-0.5 mm, 0.5-1 mm |
| Back Tension | Manually adjusted |
| Maximum sheet width that can be formed | 1450 mm |
| Coil weight | 5 MT Max |
| Mandrel movement | Manually adjusted |
| Speed of the machine | 10 -14 mt / minute |
| Total HP for Line | 15 |
| Size of machine | 9500 x 1700 x 1100 mm |
| Coil bore | 450 mm min,510 mm max dia. |
| Maximum sheet thickness in CRCA Strips that can be formed | 0.5 mm |
| Number of forming stations | 18 |
| Coil width | 1450 mm |
| Horizontal distance between shafts | 500 mm |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Job Thickness | 0.5-1 mm, 0.1-0.5 mm |
| Back Tension | Manually adjusted |
| Coil width | 1450 mm |
| Maximum sheet width that can be formed | 1450 mm |
| Number of forming stations | 18 |
| Coil weight | 5 MT Max |
| Mandrel movement | Manually adjusted |
| Coil bore | 450 mm min,510 mm max dia. |
| Maximum sheet thickness in CRCA Strips that can be formed | 0.5 mm |
| Horizontal distance between shafts | 500 mm |
| Speed of the machine | 10 -14 mt / minute |
| Total HP for Line | 15 |
| Size of machine | 9500 x 1700 x 1100 mm |
We offer finest quality Color Coated Roof Sheet Making Machine to clients. This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
Roll shafts:
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
| Material | PPGI |
| Tile Type | Roll Forming |
| Machine Type | Fully Automatic |
| Job Thickness | 0.1-0.5 mm |
| Automation Grade | Automatic |
Roll forming is continuous bending operation in which a long strip of metal sheet (usually steel coils, like PPGI, PPGL, GI, PPGL, BGL, Aluminum etc.) passes through sets of rolls mounted on consecutives stand each set performing only an incremental part of the bend, until the desired cross-section profile is obtained. Roofing sheet roll forming machine consists of an automatic Decoiler feeding guide, roll forming unit, hydraulic cutter with PLC base control system. We are involved in offering a wide array of color sheet making machine that is manufactured using high grade raw material and the latest technology with the set universal standards. These products are available in various specifications and can be customized as per variegated demands of our prestigious clients. Highest output speeds up you 30-40 meters per minute results in at least 10-15 times higher production. Maximum utilization of your investment practically any shape can be formed with uniform cross sections. Any complicated Shape Profile can be formed on our roll forming. Accuracy and consistency in Shape & dimension can be achieved. Reduced delivery period to meet your production needs quickly. We develop Roll Forming Line & Roll Tooling on our most modern software up grated with our enriched experience and technology. We have in-house CNC & VMC machining centers to produce roll tools with our own quality control and check.
CLIP GET A QUOTATIONAdditional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | JUPITER |
| Maximum sheet width that can be formed | 160 mm |
| Coil width | 190 mm |
| Maximum sheet thickness in CRCA Strips that can be formed | 1.25 mm |
| Coil bore | 450 mm min, 510 mm max dia. |
| Vertical station | 5 |
| Coil weight | 1 MT Max |
| Mandrel movement | Manually adjusted |
| Number of forming stations | 8 |
| Total HP for Line | 2 |
| Speed of the machine | 5mt/min |
| Size of machine | 1400 x 800 x 1000 mm |
| Back Tension | Manually adjusted |
| Horizontal distance between shafts | 150mm |
Our Corrugated Sheet Making Machine is for producing Aluminium or stainless steel roof channel ot corrugated sheet channel. Our Roll forming machine complete with the Roll Tool suitable to produce the foamed rolling shutter Channel in various sizes, inline foaming, punching, and cutting. Rolling shutters now have become extremely popular.
Entry Gate:
Entry gate will be provided for movement of sheet to roll former
Main Base:
The main base is MS fabricated structure” C “ channel
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stand
Mill stands (Station):
Plate type
Roll shafts:
The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling
Drive:
The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 2HP motor
Tooling:
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above