|Minimum Order Quantity||1 Unit|
The Roll forming machine can manufacture various kinds of gutters profile to satisfy customers’ required. Produced gutters are in fashionable outline and high superiority. Gutters are so mostly used in our daily life, so this machine will surely bring you a lot of profitable benefits to you.
20-ton power pre
2 nos. 3 HP
Entry gate will be provided for movement of the sheet to roll former.
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
The roll shafts dia. 55mm will be manufactured from quality steel and will be keyed to locate tooling.
The drive to the roll former will be by means of a gearbox system. The main drive will be provided by means of 10 HP motor
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with the final template for above.
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical