Product Details:
Material | Steel |
Cutting Type | Hydraulic |
Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
Automation Grade | Automatic |
Maximum sheet width that can be formed | 1450 |
Coil weight | 3 MT Max |
Coil width | 1450 mm |
Coil bore | 450 mm min, 510 mm max dia. |
Mandrel movement | Manually adjusted |
Back Tension | Manually adjusted |
Maximum sheet thickness in G I Strips that can be formed | 1 mm |
Vertical distance between shafts | 100 mm |
Horizontal distance between shafts | 190 mm |
Number of forming stations | 24 |
Vertical station | 7 |
Total HP for Line | 5 (ABB) |
Speed of the machine | 4mt/minute |
Size of machine | 1600 x 800 x 1100 mm |
We offering you to an outstanding quality range of Door Frame Roll Forming Machine. These Door Frame Making Machine can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings
Roll shafts:
The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a gearbox system
The main drive will be provided by means of 3 HP motor
Tooling:
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above
Cutting Unit:
Gearbox: ELECON
Motor: ABB
Bearing: SKF
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Back Tension | Manually adjusted |
Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
Maximum sheet width that can be formed | 1250 mm & 1450 mm |
Number of forming stations | 22 Station & 24 Station |
Total HP for Line | 8 |
Speed of the machine | 10 -14 mt / mint |
Size of machine | 9500 x 1700 x 1100 mm |
Coil weight | 5 Tone & 10 Tone |
Coil width | 1250 mm & 1450 mm |
Coil bore | 450 mm min,510 mm max dia. |
Mandrel movement | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 0.80mm |
Horizontal distance between shafts | 500 mm |
Duplex Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building''s wall. Duplex Roll Forming Machine is the essential for its production.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
Roll shafts:
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with EN grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Number Of Forming Stations | 22 |
Brand | jupiter |
Automation Grade | Automatic |
Job Thickness | 0.5-1 mm, 1-2 mm, 0.1-0.5 mm |
Driven Type | Electric |
Voltage required | 220V / 320V |
We offering you to an outstanding quality range of Door Frame Roll Forming Machine. These Door Frame Making Machine can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings
Roll shafts:
The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a gearbox system
The main drive will be provided by means of 3 HP motor
Tooling:
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above
Cutting Unit:
Gearbox: ELECON
Motor: ABB
Bearing: SKF
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Job Thickness | 0.5-1 mm, 1-2 mm, 0.1-0.5 mm |
Maximum sheet width that can be formed | 170 mm |
Coil width | 400 mm |
Mandrel movement | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 2 mm |
Number of forming stations | 18 |
Coil bore | 450 mm min,510 mm max dia |
Back Tension | Manually adjusted |
Horizontal distance between shafts | 350 mm |
Vertical station | 7 |
Speed of the machine | 3.5mt/min |
Coil weight | 1 MT Max |
Total HP for Line | 17 |
Size of machine | 5700 x 1000 x 1100 mm |
We are one of the leading organization occupied in providing brilliant quality C Purlin Roll Forming Machine, which is producing by using the high-grade material. It was widely used in every corn worldwide. we can develop special C Purlin Roll Forming Machine as per customer requirement.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type out board housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
Roll shafts:
The roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a gearbox system. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above
Feeder:
Shaft Dia.: 60 mm
Inner: 200 mm
Material: EN 31
Motor H.P.: 1
Gearbox: 1
Punching Press:
Capacity: 20 ton
Motor H.P.: 3
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Back Tension | Manually adjusted |
Job Thickness | 0.1-0.5 mm, 0.5-1 mm, 1-2 mm |
Maximum sheet width that can be formed | 1250 mm |
Maximum sheet thickness in CRCA Strips that can be formed | 1.2 mm |
Horizontal distance between shafts | 500 mm |
Number of forming stations | 16 |
Total HP for Line | 8 |
Speed of the machine | 10 -14 mt / mint |
Size of machine | 9500 x 1700 x 1100 mm |
Coil weight | 5 MT Max |
Coil width | 1250 mm |
Coil bore | 450 mm min,510 mm max dia. |
Mandrel movement | Manually adjusted |
Jupiter Enterprise manufacturing best quality Double Decker Roll Forming Machine in India also exporting worldwide. Most advanced yet simplest design and robust structure ensure precise performance, easy operation, and higher efficiency. These machines are available with 'manually' as well as 'automatically control' panel.
Entry Gate:
Entry gate will be provided for movement of sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings
Roll shafts:
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automatic Grade | Automatic |
Back Tension | Manually adjusted |
Maximum sheet width that can be formed | 1250 mm |
Number of forming stations | 16 |
Total HP for Line | 8 |
Speed of the machine | 10 -14 mt / min |
Size of machine | 9500 x 1700 x 1100 mm |
Coil weight | 5 MT Max |
Coil width | 1250 mm |
Coil bore | 450 mm min,510 mm max dia. |
Mandrel movement | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 1.2 mm |
Horizontal distance between shafts | 500 mm |
Additional Information:
Product Details:
Material | Steel |
Cutting Type | Hydraulic |
Number Of Forming Stations | 18 |
Automatic Grade | Automatic |
Job Thickness | 1-2 mm, 0.5-1 mm |
Capacity | 1-2 Ton |
Automation Grade | Automatic |
Max Sheet Width | 200-400 mm, 800-1000 mm |
Voltage | 31 |
Production Capacity | 20 Ton Per Day |
Speed | 18 MPM |
Air Consumption | Not Required |
Thickness | 0.5 To 3 MM |
Coil Bore | 80 |
Weight | 16T |
Power | 22 kW |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Cutting Type | Fully Automatic |
Job Thickness | 0.5-1 mm, 0.1-0.5 mm, 1-2 mm |
Automation Grade | Automatic |
Back Tension | Manually adjusted |
Horizontal distance between shafts | 500 mm |
Mandrel movement | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 0.5 mm |
Number of forming stations | 18 |
Total HP for Line | 15 |
Speed of the machine | 10 -14 mt / minute |
Maximum sheet width that can be formed | 1450 mm |
Size of machine | 9500 x 1700 x 1100 mm |
Coil weight | 5 MT Max |
Coil width | 1450 mm |
Coil bore | 450 mm min,510 mm max dia. |
Our Deck Channel Roll Forming Machine is offered as per your requirement. We are committed to providing quality machines for all customers with dedicated after-sales services.
Entry Gate
Entry gate will be provided for movement of the sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stand
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
Roll shafts
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Job Thickness | 0.5-1 mm, 0.1-0.5 mm, 1-2 mm |
Automation Grade | Automatic |
Back Tension | Manually adjusted |
Coil weight | 5 MT Max |
Maximum sheet width that can be formed | 1450 mm |
Maximum sheet thickness in CRCA Strips that can be formed | 0.5 mm |
Horizontal distance between shafts | 500 mm |
Number of forming stations | 18 nos |
Coil width | 1450 mm |
Total HP for Line | 15 |
Speed of the machine | 10 -14 mt / minute |
Coil bore | 450 mm min,510 mm max dia |
Mandrel movement | Manually adjusted |
Entry Gate
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type out board housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
The drive to the roll former will be by means of a chain
The main drive will be provided by means of 10 HP motor
Tooling
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 20-60MPM |
Production Capacity (meters/min) | 15-50 MPM |
Size | ANY |
Back Tension | Manually adjusted |
Automatic Grade | Automatic |
Brand | JUPITER |
Model | RFM |
Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
Maximum sheet width that can be formed | 1450 mm |
Maximum sheet thickness in CRCA Strips that can be formed | 0.5 mm |
Horizontal distance between shafts | 500 mm |
Number of forming stations | 18 |
Total HP for Line | 15 |
Speed of the machine | 10 -14 Mt / Minute |
Size of machine | 9500 x 1700 x 1100 mm |
Coil weight | 5 MT Max |
Coil width | 1450 mm |
Coil bore | 450 mm min,510 mm max dia. |
Mandrel movement | Manually adjusted |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | PPGI | PPGL | NCGI |
Max Sheet Width | 1220mm & 1450mm |
Automation Grade | Automatic |
Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
System Control | PLC Base Automation Systeam |
Coil Bore | 425 to 525 |
Decoiler | 5 Tone & 10 Tone |
Number Of Forming Stations | Width 1220 x 22 Station & Width 1450 x 24 Station |
Material Of Blade | HcHcR / WPS / |
Sheet Width | 1220 & 1450 |
Brand | JUPITER |
We are among the leading names in the industry, engaged in Producing an exclusive range of Roofing Tile Roll Forming Machine. We have developed our machine as per the industry standards. Owing to their easy manufacturing process, excellent performance and effective solutions, these machines are widely appreciated.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stand
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
Roll shafts:
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Cutting Type | Fully Automatic |
Number Of Forming Stations | 24 |
Usage/Application | Sheet Forming |
Model Name/Number | Roofing |
Capacity | 25 ton |
Automatic Grade | Automatic |
Our Arch Sheet Roll Forming Machine has high Precession quality. Although there are many suppliers for this machine and many machine factory produce this machine, our company is the is a qualified Producer, Highly Skilled Staff, After Sales Services. So our company is the best choice for you.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts:
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Job Thickness | 2-3 mm, 0.1-0.5 mm |
Coil weight | 2 MT Max |
Maximum sheet width that can be formed | 600 mm |
Coil width | 600 mm |
Coil bore | 450 mm min, 510 mm max dia. |
Mandrel movement | Manually adjusted |
Back Tension | Manually adjusted |
Maximum sheet thickness in G I Strips that can be formed | 1 mm |
Vertical distance between shafts | 100 mm |
Horizontal distance between shafts | 190 mm |
Number of forming stations | 9 |
Vertical station | 7 |
Total HP for Line | 5 (ABB) |
Speed of the machine | 4 mt/minute |
Size of machine | 1600 x 800 x 1100 mm |
One of the most common uses for a Stud Track Roll Forming Machine is for the Producing of steel stud and Channel. With inflexible web and flange heights, these industrial stud makers can produce virtually all of the standard stud and track sizes used in Worldwide Market.
Entry Gate
Entry gate will be provided for movement of the sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
The roll shafts dia. 40mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
The drive to the roll former will be by means of a gearbox system
The main drive will be provided by means of 1HP motor
Tooling
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with a final template for above.
Cutting Unit
Power press (with dais 2 set )
Gearbox: ELECON
Motor: ABB
Bearing: SKF
Additional Information:
Product Details:
Usage/Application | Purline Making machine |
Material | Mild Steel |
Cutting Type | Fully Automatic |
Number Of Forming Stations | 18 |
Automation Grade | Automatic |
Job Thickness | 0.5-1 mm, 1-2 mm |
Max Sheet Width | 200-400 mm, 800-1000 mm |
Power | 30 HP |
Size | 80 TO 300 MM |
Production Capacity | 1.5 TON |
Air Consumption | Not Required |
Capacity | 19 Ton |
Coil Bore | 500 |
Decoiler | 5 TON |
Hydraulic Power | 7.5 HP |
Main Motor Power | 25 HP |
Phase | 3 |
Pressure | 2 |
Weight | 15 TON |
Coil Width | 4TON |
Warranty | 1 year |
Frequency | 50 |
Working Speed | 15 MPM |
Number Of Workstation | 18 |
Roller Diameter | 400 to 800 |
Material Grade | EN-31 |
Hydraulic Pressure | 1500 Bar |
Driven Type | Gear Drive |
Yield Strength | 550 Mpa |
Blade Material | WPS |
Speed Of The Machine | 18 MPM |
Kind Of Drive | Delta |
Back Tension | 3 |
Height | 300 |
System Control | PLC |
Bending Roller | Yes |
Core Diameter | 500 |
OEM Service | Yes |
I Deal In | New Only |
Model Name/Number | JRF- CZ 80-300 |
Maximum Sheet Thickness In G I Strips That Can Be Formed | 800 |
Product Details:
Material | Steel |
Cutting Type | Fully Automatic |
Automation Grade | Automatic |
Job Thickness | 0.5-1 mm, 0.1-0.5 mm |
Max Sheet Width | 800-1000 mm, 200-400 mm |
Power | 30 HP |
Size | 12*75 Feet |
Production Capacity | 30 Ton Per Day |
Air Consumption | Not Required |
Capacity | 25 MPM |
Decoiler | 10 Ton |
Hydraulic Power | 7.5 HP |
Main Motor Power | 15 HP |
Model Name/Number | JRF-RMSD72524 |
Phase | 3 |
Pressure | 0.5 |
Additional Information:
Product Details:
Production Capacity | 1-3 ton/day |
Power Consumption | 25 HP |
Machine Type | Fully Automatic |
Job Thickness | 0.2-0.8mm |
Max Sheet Width | 1450mm |
Material | PPGI,PPGL,BGL |
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Job Thickness | 0.5-1 mm, 0.1-0.5 mm, 1-2 mm |
Maximum sheet width that can be formed | 1250 mm |
Back Tension | Manually Adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 1.2 mm |
Horizontal distance between shafts | 500 mm |
Number of forming stations | 16 |
Total HP for Line | 8 |
Speed of the machine | 10 -14 mt / mint |
Size of machine | 9500 x 1700 x 1100 mm |
Coil weight | 5 MT Max |
Coil width | 1250 mm |
Coil bore | 450 mm min,510 mm max dia. |
Mandrel movement | Manually Adjusted |
We are involved in manufacturing accurately CZ Purlin Roll Forming Machine. These products are mainly used for structural purposes in diverse industries. The entire range is fabricated using high-quality raw materials at our modern and well-equipped manufacturing facility. We have an ability to produce bulk needs of ceiling section of the customer within the specific time frame.
Entry Gate
Entry gate will be provided for movement of the sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Back Tension | Manually adjusted |
Job Thickness | 0.1-0.5 mm, 1-2 mm, 0.5-1 mm |
Maximum sheet width that can be formed | 55 mm |
Mandrel movement | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 1 mm |
Vertical distance between shafts | 80 mm |
Horizontal distance between shafts | 175 mm |
Number of forming stations | 9 |
Vertical station | 7 |
Total HP for Line | 3 (ABB) |
Speed of the machine | 4 mt/minute |
Size of machine | 1600 x 800 x 1100 mm |
Coil weight | 1 MT Max |
Coil width | 90 mm |
Coil bore | 450 mm min,510 mm max dia. |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Job Thickness | 0.1-0.5 mm, 1-2 mm, 0.5-1 mm |
Maximum sheet width that can be formed | 600 mm |
Coil weight | 2 MT Max |
Coil width | 600 mm |
Coil bore | 450 mm min, 510 mm max dia. |
Mandrel movement | Manually adjusted |
Back Tension | Manually adjusted |
Shaft Dia | 60 mm |
Inner | 200 mm |
Maximum sheet thickness in G I Strips that can be formed | 1 mm |
Vertical distance between shafts | 100 mm |
Horizontal distance between shafts | 190 mm |
Number of forming stations | 9 |
Vertical station | 7 |
Total HP for Line | 3(ABB) |
Speed of the machine | 4mt/minute |
Size of machine | 1600 x 800 x 1100 mm |
The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control panel and much other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacturing a both superiority and quantity cable trays in less time.
Entry Gate
Entry gate will be provided for movement of the sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
Roll shafts
The roll shafts dia. 50 mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive
The drive to the roll former will be by means of a gearbox system
The main drive will be provided by means of 3 HP motor
Tooling
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with a final template for above.
Cutting Unit
Gearbox: ELECON
Motor: ABB
Bearing: SKF
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Back Tension | Manually adjusted |
Job Thickness | 1-2 mm, 0.5-1 mm, 0.1-0.5 mm |
Maximum sheet width that can be formed | 55 mm |
Speed of the machine | 4 mt/minute |
Size of machine | 1600 x 800 x 1100 mm |
Coil weight | 1 MT Max |
Coil width | 90 mm |
Coil bore | 450 MM min,510 MM max dia |
Mandrel movement | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 1 mm |
Vertical distance between shafts | 80 mm |
Horizontal distance between shafts | 175mm |
Number of forming stations | 9 nos |
Vertical station | 7 nos |
Total HP for Line | 3 (ABB) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Automation Grade | Fully Automatic |
Material | Mild Steel |
Max Cutting Thickness | 3mm |
Color | Blue |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Size | 65 feet |
Material | Mild Steel |
Model Name/Number | floor deck |
Capacity | 2000~2500 Pcs/8hours |
Condition | New |
Power(KW) | 4 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Tile Type | Liner Profile |
Power Consumption | 10kw |
Max Sheet Width | 0-200 mm |
Machine Type | Fully Automatic |
Job Thickness | 0.1-0.5 mm |
Automation Grade | Automatic |
PPGL / PPGI / BGL / GC |
Additional Information:
Product Details:
Material | Steel |
Cutting Type | Fully Automatic |
Job Thickness | 0.1-0.5 mm |
Power | 10 KW |
Size | 9500 x 1700 x 1100 |
Automation Grade | Automatic |
Right at this moment there are two kinds of downspout roll forming machines in the market for the manufacturing of square and round rainspouts.
In downspout roll forming machine which is strong and suitable for massive production of steel pipes.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Capacity | 10 m/min |
Automation Grade | Automatic |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automatic Grade | Automatic |
Maximum sheet width that can be formed | 850 mm |
Coil width | 400 mm |
Coil bore | 850 mm min,1100 mm max dia. |
Mandrel movement | Hydro |
Back Tension | Manually adjusted |
Maximum sheet thickness in CRCA Strips that can be formed | 5 mm (M.S.) |
Horizontal distance between shafts | 500 mm |
Number of forming stations | 16 |
Vertical station | 12 |
Total HP for Line | 23 |
Speed of the machine | 3 to 4 mt/minit |
Size of machine | 8500 x 1600 x 1000 mm |
Coil weight | 10 MT Max |
Additional Information: