Standing seam metal roof machine and onsite portable roll forming. The network of roofing contractors who onsite roll form the metal roofing purchase the metal at coil prices and not finished panel prices and they
Highway Guardrail Roll Forming Machine can produce a variety of guardrails which is Mostly used in high way Road. Produced guardrails are all in high quality, Durability, Long lasting Life and they are also easy to be installed. One production Machine can produce products of a wide range of specifications, so you will surely get Profile a lot.
Entry gate will be provided for movement of the sheet to roll former.
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearings
For the top shafts, the bearings are housed in the cartridge type bearing blocks
The bottom shaft bearings are located in the bored machined in the housings
The bottom arbors are fixed in the position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
The roll shafts dia. 70 mm will be manufactured from quality steel and will be keyed to locate tooling.
The drive to the roll former will be by means of a gearbox system
The main drive will be provided by means of 15 HP motor
One set of Tooling with EN31 / D3 grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining trial and hardening, bore grinding and inspection with a final template for above.
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.