Product Details:
Usage/Application | Roofing For Deck |
Material | Steel |
Cutting Type | Fully Automatic |
Number Of Forming Stations | 26 |
Automation Grade | Automatic |
Job Thickness | 1-2 mm, 0.5-1 mm |
Max Sheet Width | 800-1000 mm |
Power | 30 HP |
Voltage | 210 |
Size | 14*51 |
Production Capacity | 3 Ton |
Decoiler | 500MM |
Hydraulic Power | 7.5 HP |
Main Motor Power | 25 HP |
Total Hp For Line | 40 |
Model Name/Number | JRF-Deck Sheet Machine |
Phase | 3 |
Pressure | 2mm |
Weight | 16 Ton |
Coil Width | 1500 |
Warranty | 1 year |
Frequency | 50 |
Working Speed | 18MPM |
Number Of Workstation | 26 |
Roller Diameter | 170MM |
Material Grade | EN-31 |
Coil Weight | 8 Ton |
Hydraulic Pressure | 3000Bar |
Driven Type | Gear Drive |
Yield Strength | 550MPA |
Blade Material | WPS |
Kind Of Drive | Gear |
Mandrel Movement | Roller |
System Control | PLC |
OEM Service | Yes |
I Deal In | New Only |
Floor decking roll forming machine is manually used to produce steel floor decking and can produce high quality floor decking has advantages, such as no cutting deformation, high strength and a large working load. It can be directly mixed with the steel mesh and concrete with good adhesion, Applied in High-rise steel building, it can save the steel molding templates, and also reduce the floor load. Under the same capacity, it can reduce the amount of steel to achieve cost-saving.
Decking forming machine consists of Uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, PLC base controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. It’s best to be used as the floor of high buildings, and the cost for Construction of floor is low.
Features: • High solid forming stand guarantees the stable forming and uniform high quality of final products. • Able to secure higher productivity since the management of the line is automated by controlling an electronic system. • Improved cutting method minimizes the tolerance of cutting length.
Product Details:
Material | Steel |
Cutting Type | Fully Automatic |
Automation Grade | Automatic |
Right at this moment there are two kinds of downspout roll forming machines in the market for the manufacturing of square and round rainspouts.
In downspout roll forming machine which is strong and suitable for massive production of steel pipes.
Additional Information:
Product Details:
Usage/Application | Roofing |
Material | Mild Steel |
Cutting Type | Fully Automatic |
Number Of Forming Stations | 24 |
Capacity | 20 TON |
I Deal In | New Only |
Automation Grade | Semi-Automatic, Manual, Automatic |
Decoiler | 10 TON |
Forming Speed | 25MPM |
Job Thickness | 0.1-0.5 mm, 1-2 mm, 0.5-1 mm |
Material Thickness | 0.25 TO 2 MM |
Mechanism | COLD FORMING |
Max Sheet Width | 800-1000 mm |
Power | 25 |
Motor Power | 30HP |
Phase | 3 |
Size | 1220MM |
Power Source | 50HZ |
Production Capacity | 30 TON PER DAY |
Air Consumption | NOT REQUIRED |
Model Name/Number | JRF-RMSD62522 |
Coil Bore | 500 |
Hydraulic Power | 5HP |
Main Motor Power | 30HP |
Pressure | 3000BAR |
Weight | 14 TON |
Coil Width | 1220 TO 1450 |
Warranty | 1 YEAR |
Frequency | 50 |
Working Speed | 18MPM |
Number Of Workstation | 24 |
Roller Diameter | 160 |
Material Grade | EN31 |
Coil Weight | 8 TON |
Driven Type | CHAIN |
Yield Strength | 550MPA |
Blade Material | WPS |
System Control | PLC |
OEM Service | Yes |
Maximum Sheet Thickness In G I Strips That Can Be Formed | YES |
Additional Information: